Tesla Model 3 Prepreg Carbon Fiber Side Skirts
Complete the side profile of your Tesla Model 3 with the ADRO full carbon fiber side skirt kit. This kit comes with everything you need for a quick and easy installation that is guaranteed to give your Tesla Model 3 a whole new look. This side skirt is engineered to increase aerodynamic efficiency by decreasing drag so that you get better performance and efficiency out of your Tesla Model 3. Since this is made from one hundred percent real handcrafted carbon fiber, you won't find lighter or stronger side skirts on the market. You can combine this carbon fiber side skirt kit with the ADRO carbon fiber front lip and carbon fiber rear diffuser to get the maximum amount of performance, range, and aesthetic out of your Tesla Model 3. These are the highest quality aftermarket parts currently available for the Tesla Model 3 and when they're all fitted together, they will make a world of difference that will make you fall in love with your Model 3 all over again.
This premium body kit is manufactured from 100% genuine prepreg carbon fiber and is ultra-lightweight with maximum durability and quality. Commonly used in high-end race cars and supercars, prepreg (aka dry) carbon fiber is now available for drivers looking for the very best.
Using computational fluid dynamics (CFD), our team of aerodynamicists tested the efficiency gains of a Tesla Model 3 fitted with ADRO’s aero package compared to a factory car. Our CFD analyses showed a 3.25% reduction in total vehicle drag and a downforce increase of 846 N, resulting from the installation of all four ADRO parts - front lip, side skirt, rear diffuser, and spoiler. This means that ADRO’s Premium Prepreg Carbon Fiber Full Body Kit made the Model 3 even more aerodynamically efficient, which will ultimately translate into a positive effect on overall range and performance.
| SKU: | A15A10-1401
|
| Compatible with:
| 2022-23 Tesla Model 3 Base
2022-23 Tesla Model 3 Long Range
2022-23 Tesla Model 3 Performance
2021 Tesla Model 3 Standard Range Plus
2021 Tesla Model 3 Long Range
2021 Tesla Model 3 Performance
2020 Tesla Model 3 Standard Range
2020 Tesla Model 3 Standard Range Plus
2020 Tesla Model 3 Long Range
2020 Tesla Model 3 Performance
2019 Tesla Model 3 Standard Range
2019 Tesla Model 3 Standard Range Plus
2019 Tesla Model 3 Mid Range
2019 Tesla Model 3 Long Range
2019 Tesla Model 3 Performance
2018 Tesla Model 3 Standard
2018 Tesla Model 3 Mid Range
2018 Tesla Model 3 Long Range
2018 Tesla Model 3 Performance
2017 Tesla Model 3 Standard
2017 Tesla Model 3 Long Range |
| Full body kit includes: | 5.73 lbs |
| Material: | Prepreg (dry carbon fiber) |
| CFD results: | 3.25% reduction in total vehicle drag
846 N downforce increase
|
| Dimensions: | 2085mm x 235mm x 155mm |
| What’s in the box: | 2 Carbon fiber side skirts
3M tape
Screws
1 Installation manual |
| Version: | 1st generation |
| Installation Guide: | Tesla Model 3 Installation Guide |
Processing
Please allow 3 to 5 business days for your order to process, unless a product is specified as a pre-order. You will be notified with a tracking number when your package has shipped. Processing time may be longer if your payment has not been cleared.
Shipping
In-stock orders are shipped out via UPS Ground OR Pilot Freight from our Gardena, CA warehouse within 48-72 hours of order processing and confirmation of payment. You will be notified via email with a tracking number when your package has shipped.
Lower 48 States
We only ship to the continental USA (48 states). If shipping to Hawaii or Alaska, please contact us at [email protected].
Warranty Policy i. If a product should fail due to manufacturer’s defect within the stated warranty period, ADRO will repair or replace the failed product.
ii. It is the responsibility of the customer/installer to verify the correct size and application of the parts before installation, and to ensure that proper installation is performed. Problems or failure caused by improper installation are not covered under the ADRO Limited Warranty.
iii. Warranty claims shall be serviced by the applicable seller (ADRO or Authorized Dealer/Reseller).
iv. If an item is returned and exhibits damage not covered by the ADRO Limited Warranty, a quote will be generated for repair or replacement, plus delivery to the owner. At that time, the owner will have a choice to either pay for the repair or replacement, or request that the item be returned without any action taken by ADRO. If Warranty requirements are met, the repaired or replaced item will be returned without charge and will continue to be covered for the balance of the original warranty period.
v. All return shipments must be freight prepaid and insured (against loss or damage) with tracking number. No C.O.D. shipments will be accepted. If the warranty claim is fulfilled, the additional shipping expenses incurred will be compensated.
vi. The following situations are not covered by warranty:
- Product that has been subject to misuse, neglect, accident, or that has been improperly installed.
- Product that has been modified or altered from its original manufactured state.
- Costs incurred by the purchaser, such as transportation, additional labor costs, time, towing, storage, premium (air or overnight) freight charges, rental costs of any type, logistics, importing fees, taxes and duties, or economic losses, etc..
Returns
Our returns policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately, we can’t offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. All returns are subject to a 20% restocking fee plus the cost of shipping the products back to our warehouse.
Returns Process for All Purchase and Warranty Returns
-
Customers who purchased products from an Authorized ADRO Dealer/Retailer must contact their respective dealer/reseller to initiate the return process.
- When emailing for an RMA number, please include the following information: copy of the invoice, brief description of the problem, full name, return email address (if different from the originating e-mail), shipping address, phone number and best time to call. Once an RMA number is received, it should be clearly marked on the outside of the box.
The following information must be included inside the box: A copy of the invoice, reason for return, name, phone number, and return address.
If your order has been shipped via Pilot Freight, please inspect your order for damages immediately after accepting delivery of your order. To file a claim for any damaged product, you must do the following, within 48 hours of signing for the delivery:
- Contact Black Ops Auto Works and Pilot Freight with your tracking number and order number.
- Keep all boxes, packing materials and ADRO products together. Do not discard any boxes or packing materials.
- Provide a minimum of 3 images of the damaged box and item(s).
- Brief description of the damaged part and where damage is located.
Failure to do the above will waive your rights to claim for shipping damages and all losses will be your responsibility.
