Lamborghini - Exhaust Bypass Valve Controller Remote Kit
The Forza Componenti exhaust bypass valve controller kit is the complete
solution that allows the user full manual control of the vehicle's vacuum
actuated exhaust bypass valves. The controller has an integrated printed circuit
board that controls the negative side of the exhaust bypass vacuum solenoids.
The user can manually open the exhaust bypass valves to have that classic engine
sound at all speeds and engine RPMs. Of course, you can return the operation of
the exhaust valves to the car's ECU — which generally results in lower engine
noise at low vehicle speeds and engine RPM.
The exhaust bypass valve kit provides three different operational modes:
- Normal Mode: In this mode, the vehicle controls the operation of
the exhaust bypass valves. This is the stock operation.
- Always Open: Selecting this mode will force the exhaust bypass
valves to the open position — and remain open. When the valves are Always
Open, you have the full experience of hearing your engine exhaust at any
time.
- Always Closed: Selecting the Always Closed mode will force the
exhaust bypass valves to remain closed at all times. This overrides the ECU
control which opens the valves at predetermined engine and vehicle speeds.
This mode is especially useful to ensure that your vehicle is as quiet as
possible. Note: With this option, you can force the valves to stay in
the closed position at all times. This feature was added at the request of
people who track their cars at locations with strict noise standards and did
not want the vehicle ECU to open the valves at high engine RPM.
Each kit is assembled using components
designed to withstand the rigors of installation in the engine bay of modern
sports car. The enclosure is extruded aluminum. The internal circuit board will
withstand the elevated temperatures that tend to exist in the engine bay of a
vehicle. The connection cables are constructed using high serviceability TPE
insulated cabling rated to 105° C. Connectors are weatherproof automotive
connectors to resist moisture.
Plug-and-Play ... 100% Reversible
The kit is completely plug-and-play. Power for the controller comes from the
existing connector to the car's exhaust bypass vacuum solenoids, and no wiring
modification are required because the kit includes connector cables for the
vacuum solenoids.
Installation is straight forward. You only need to select a location to
install the controller, unplug the vacuum solenoids, connect the included cables
and route the cables to the controller. Once installation is complete, you use
one button on your remote transmitter to open the exhaust bypass valves and the
other button to close the valves and return control to the car ... and, you also
have the ability to configure a manual on/off switch that you can mount inside
your vehicle.
Since no modifications are required to install, if you ever want to remove
the controller the installation is 100% reversible.
The controller includes one Remote Control Transmitter. Additional
transmitters are available.
Key features:
- Completely self contained controller box
- User configuration to use either the remote control key fob or use a
manual on/off switch
- Approved FCC, CE and all international governing bodies
- Always Closed option can be used to keep the valves closed at all
times
- All internal components integrated on Printed Circuit Board for
higher reliability
- Fail safe mode ... when vehicle ignition is turned off, exhaust
bypass valve control reverts to factory ECU
- No Check Engine Lights (CEL) or Diagnostic Test Codes (DTC)
- Cables assembled using water and oil resistant flexible cord - 18
AWG stranded Class K copper conductors per ASTM B-174. Cable is rated
SJEEOW for severe outdoor service with TPE insulation rated to 105° C.
Type SJEOOW cords are ideal for flex applications in harsh high
temperature environments where highest degree for water and oil
resistance and extended service life are essential.
- All electrical cables use weatherproof connectors
- High-gain external antenna for improved remote control performance
- Kit includes full installation instructions and one remote control
transmitter, mounting accessories including cable ties and high
temperature tolerant adhesive mounts
- Remote control can be programmed to newer versions of HomeLink
(version 5 and higher) that is integrated into many cars. Older
versions of HomeLink (earlier than 2013) will not support the 433MHz
frequency of the remote transmitter
- The controller kit is warranted to be free of defects. If the
controller should fail within 12 months of installation, return it to us
for repair or replacement
This item will fit the following model/s: